NORTH‌‌ ‌‌COAST, ‌‌ ‌‌Calif. — Caltrans‌‌ ‌‌reports‌‌ ‌‌that‌‌ ‌‌the‌‌ ‌‌following‌‌ ‌‌road‌‌ ‌‌projects‌‌ ‌‌will‌‌ ‌‌be‌‌ ‌‌taking‌‌ ‌‌place‌‌ ‌‌‌around‌‌ ‌‌the‌‌ ‌‌North‌‌ ‌‌Coast‌‌ ‌‌during‌‌ ‌‌the‌‌ ‌‌coming‌‌ ‌‌week. ‌‌ ‌‌‌ ‌
‌‌‌ ‌
Included‌‌ ‌‌are‌‌ ‌‌Mendocino‌‌ ‌‌County‌‌ ‌‌projects‌‌ ‌‌that‌‌ ‌‌may‌‌ ‌‌impact‌‌ ‌‌Lake‌‌ ‌‌County‌‌ ‌‌commuters, as well as work in Del Norte and Humboldt counties.
‌‌‌ ‌
Caltrans‌‌ ‌‌advises‌‌ ‌‌motorists‌‌ ‌‌to‌‌ ‌‌drive‌‌ ‌‌with‌‌ ‌‌caution‌‌ ‌‌when‌‌ ‌‌approaching‌‌ ‌‌work‌‌ ‌‌areas‌‌ ‌‌and‌‌ ‌‌to‌‌ ‌‌be‌‌ ‌‌‌prepared‌‌ ‌‌to‌‌ ‌‌stop‌‌ ‌‌at‌‌ ‌‌traffic‌‌ ‌‌control‌‌ ‌‌stations. ‌‌ ‌‌‌ ‌
‌‌‌ ‌
The‌‌ ‌‌Caltrans‌‌ ‌‌Traffic‌‌ ‌‌Operations‌‌ ‌‌Office‌‌ ‌‌has‌‌ ‌‌reviewed‌‌ ‌‌each‌‌ ‌‌project‌‌ ‌‌and‌‌ ‌‌determined‌‌ ‌‌that‌‌ ‌‌individual‌‌ ‌‌‌project‌‌ ‌‌delays‌‌ ‌‌are‌‌ ‌‌expected‌‌ ‌‌to‌‌ ‌‌be‌‌ ‌‌less‌‌ ‌‌than‌‌ ‌‌the‌‌ ‌‌statewide‌‌ ‌‌policy‌‌ ‌‌maximum‌‌ ‌‌of‌‌ ‌‌30‌‌ ‌‌minutes‌‌ ‌‌unless‌‌ ‌‌‌noted‌‌ ‌‌otherwise. ‌‌ ‌‌‌ ‌‌‌ ‌

For‌‌ ‌‌updates‌‌ ‌‌to‌‌ ‌‌this‌‌ ‌‌list‌‌ ‌‌check‌‌ ‌‌QuickMap‌‌ ‌‌at‌‌ ‌‌‌www.dot.ca.gov‌‌‌ or‌‌ ‌‌1-800-GAS-ROAD‌‌ ‌‌‌(1-800-427-7623). ‌‌ ‌‌‌ ‌

LAKE COUNTY

Highway 20

Route 20 (1.1/2.4) – Construction work from Blue Lakes Road to Irvine Avenue will continue. One-way traffic control will be in effect from 7 a.m. to 2 p.m. Motorists should anticipate up to 15-minute delays. LC#P20KA

Route 20 (8.8/9.2) – Traffic signal work in Upper Lake from Main Street to Government Street continues. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20FA

Route 20 (12.4/12.8) – Utility work in Nice from Stokes Avenue to Lakeview Drive will occur on Friday, October 25. Lane closures will be in effect from 8 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20CA

Route 20 (13.5) – Traffic signal work in Nice at Sayre Avenue will continue. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20FA

Route 20 (13.7/13.8) – Traffic signal work in Nice from Keeling Avenue to Howard Avenue continues. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20FA

Route 20 (14/17.7) – Traffic signal work from Hudson Avenue in Nice to 16th Avenue in Lucerne continues. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20FA

Route 20 (28.5) – Traffic signal work in Clearlake Oaks at Butler Street continues. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20FA

Route 20 (30.1/31.6) – Utility work east of Clearlake Oaks from Morine Ranch Road to Jct Route 53 will occur on Friday, October 25. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect up to 5-minute delays. LC#P20CA

Highway 175

Route 175 (1.2/7.6) – Road work at various locations from Dixon Drive to Ridge Road will occur on Friday, October 25. One-way traffic control will be in effect from 9 a.m. to 4 p.m. Motorists should expect up to 5-minute delays. LC#P175AA

Route 175 (16.2) – Tree work will occur at Loch Lomond Road on Monday and Tuesday, October 28-29. One-way traffic control will be in effect from 8 a.m. to 3 p.m. Motorists should expect up to 5-minute delays. LC#P175BA

Route 175 (17/22) – Landscape work at various locations from north of Grouse Springs Road to near Austin Drive will begin on Thursday, October 31. One-way traffic control will be in effect from 6:30 a.m. to 4:30 p.m. Motorists should expect up to 5-minute delays. LC#M175AA

MENDOCINO COUNTY

Highway 1

Route 1 (6.1/6.5) – Utility work north of Anchor Bay at Havens Neck Drive will occur on Friday, November 1. One-way traffic control will be in effect from 7:30 a.m. to 11:30 a.m. Motorists should expect up to 5-minute delays. LC#P1BA

Route 1 (6.7/7) – Utility work north of Anchor Bay will occur at Gypsy Flat Road on Monday and Tuesday, October 28-29. One-way traffic control will be in effect from 9:00 a.m. to 4:30 p.m. Motorists should expect up to 5-minute delays. LC#P1FA

Route 1 (31.1/31.6) – Bridge work at the Elk Creek Bridge 10-120 continues. One-way traffic control will be in effect from 7 a.m. to 4 p.m. Motorists should anticipate up to 10-minute delays. LC#C1WA

Route 1 (51.4/51.9) – Bridge work north of Mendocino at the Jack Peters Creek Bridge 01-43484 from Lansing Street to south of Road 500D. One-way traffic control will be in effect and motorists should expect up to 10-minute delays. LC#C1VA

Route 1 (62.8/63.8) – Culvert work in Fort Bragg from Airport Road to Happy Lane will occur on Friday, October 25. One-way traffic control will be in effect from 8:30 a.m. to 5:00 p.m. and motorists should expect up to 5-minute delays. LC#S1DA

Route 1 (75.4/76.1) – Emergency work south of Westport from the Blues Beach Trailhead to the Overlook will continue. One-way traffic control will be in effect from 7 a.m. to 6 p.m. Motorists should anticipate up to 20-minute delays. LC#C1TA

Route 1 (77.7/78.1) – Road work at the Black Sand Beach Vista Point will occur on Friday, October 25. One-way traffic control will be in effect from 1 p.m. to 7 p.m. Motorists should anticipate up to 10-minute delays. LC#C1CB

Route 1 (82.2/82.9) – Road work from the Portal Rock Vista Point to the Devonte Vista Point continues. One-way traffic control will be in effect and motorists should expect up to 5-minute delays. LC#C1BB

Route 1 (87.8/103.2) – Road work north of Rockport from Usal Road to Jct Route 271 in Leggett. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#C1QA

Highway 20

Route 20 (5.8) – Utility work east of Fort Bragg at the Camp One Access Road will occur on Thursday, October 31. One-way traffic control will be in effect from 3 p.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#P20AA

Route 20 (29/29.5) – Utility work west of Willits near the Broaddus Creek Bridge 10-104 will occur on Saturday and Sunday, October 26-27. One-way traffic control will be in effect from 7 a.m. to 7 p.m. and motorists should expect up to 5-minute delays. LC#P20CA

Route 20 (33.3/34.8) – Paving work from the North Calpella Overcrossing 10-206 to Road A continues. One-way traffic control will be in effect from 7 p.m. to 6 a.m. Motorists should expect up to 10-minute delays. LC#C20BB

Highway 101

U.S. 101 (30.7/33.8) – Road work north of Ukiah from Route 20 to Uva Drive continues. Lane closures will be in effect from 7 a.m. to 5 p.m. and motorists should expect up to 5-minute delays. LC#C101RB

U.S. 101 (30.8) – Bridge work at Route 20 will continue. A full northbound offramp closure will be in effect from 7 p.m. to 5 a.m. Motorists should anticipate up to 15-minute delays. LC#C101WC

U.S. 101 (33.7/43.2) – Road work south of Willits from Route 20 to Uva Drive in Redwood Valley will continue. Lane closures will be in effect from 7 a.m. to 5 p.m. and motorists should expect up to 5-minute delays. LC#M101QD

U.S. 101 (48.9/55.2) – Paving work near the North Willits Railroad Crossing to Big Trails Drive continues. One-way traffic control will be in effect and motorists should anticipate up to 20-minute delays. LC#C101SA

U.S. 101 (54.9/64.6) – Paving work south of Laytonville at various locations from Big Trails Drive to Sloan Road will conclude on Friday, October 25. Lane closures will be in effect from 7 a.m. to 5 p.m. Motorists should expect minor slowdowns. LC#C101BC

U.S. 101 (59.3/59.9) – Bridge work south of Laytonville at Jct Route 162 continues. One-way traffic control will be in effect from 1 p.m. to 5 p.m. Motorists should anticipate up to 15-minute delays. LC#C101SB

U.S. 101 (63.4/64.6) – Culvert work from the Long Valley Creek Bridge 10-98 to Shamrock Ranch will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should anticipate up to 15-minute delays. LC#C101ED

U.S. 101 (63.4/64.6) – Landscape work from the Long Valley Creek Bridge 10-98 to Shamrock Ranch will begin on Monday, October 28. One-way traffic control will be in effect from 7:30 a.m. to 7:00 p.m. Motorists should anticipate up to 10-minute delays. LC#C101ED

U.S. 101 (64.6.9/65) – Paving work south of Laytonville at Shamrock Ranch continues. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 5-minute delays. LC#C101BC

U.S. 101 (103.8/106.5) – Landscape work from the Piercy Separation 10-91 to the South Fork Eel River Bridge 10-218 continues. One-way traffic control will be in effect from 6 a.m. to 4 p.m. and motorists should expect up to 5-minute delays. LC#M101EA

Highway 128

Route 128 (33.5/35) – Tree work will occur south of Boonville near the Shearing Creek Bridge 10-59 on Tuesday, October 29. One-way traffic control will be in effect from 7:00 a.m. to 5:30 p.m. Motorists should expect up to 5-minute delays. LC#P128CA

Highway 162

Route 162 (7.9/8.4) – Bridge work at the Eel River Bridge 10-236 continues. Lane closures will be in effect and motorists should expect up to 10-minute delays. LC#C162HA

Route 162 (11/12.6) – Road work south of Dos Rios near the Rodeo Creek Bridge 10-237 continues. One-way traffic control will be in effect from 3 p.m. to 7 a.m. weeknights. Motorists should expect up to 10-minute delays. LC#C162IA

Route 162 (15.9/17.6) – Paving work from east of Laytonville Dos Rios Road to east of Hosea Creek continues. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 10-minute delays. LC#C162EA

Route 162 (19.4/21.1) – Paving work at Sand Band Bank Creek will continue. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 10-minute delays. LC#C162EA

Route 162 (22.9/26.4) – Paving work south of Covelo from west of the Round Valley State Historical Landmark to Fairbanks Lane continues. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect up to 10-minute delays. LC#C162EA

Highway 253

Route 253 (1.7/2.3) – Road work near Boonville at Bald Hills Ranch will continue. One-way traffic control will be in effect and motorists should anticipate up to 10-minute delays. LC#C253DA

DEL NORTE COUNTY

Highway 101

U.S. 101 (35.8/36.5) – Construction at the Dr. Fine Bridge near Smith River will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect 10-minute delays. LC#C101WA

HUMBOLDT COUNTY

Highway 36

Route 36 (0.0/2.8) – Construction near Alton from U.S. 101 to Rohnerville Road will conclude on Friday, October 25. One-way traffic control will be in effect from 7 a.m. to 7 p.m. weekdays. Motorists should expect 15-minute delays. LC#C36AA

Route 36 (11/11.5) – Bridge work near Pamplin Grove will continue. One-way traffic control will be in effect. Motorists should expect 10-minute delays. LC#C36UA

Route 36 (13.5/17) – Striping work west of Bridgeville will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect 15-minute delays. LC#C36BA

Route 36 (14.7/19.9) – Striping work east of Bridgeville will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect 15-minute delays. LC#C36BA

Route 36 (25.3/25.4) – Bridge work east of Bridgeville will continue. One-way traffic control will be in effect. Motorists should expect 10-minute delays. LC#C36UA

Route 36 (25.6/25.7) – Emergency work near the Caltrans Bridgeville Maintenance Station will continue. One-way traffic control will be in effect from 6 a.m. to 7 p.m. Motorists should expect 5-minute delays. LC#C36DA

Highway 101

U.S. 101 (2.8) – Work near Legend of Bigfoot will begin on Monday, October 28. One-way traffic control will be in effect from 7 a.m. to 6 p.m. Motorists should expect 5-minute delays. LC#P101HA

U.S. 101 (12/16) - Landscape work near Garberville will continue. Lane closures will be in effect from 6:30 a.m. to 4:30 p.m. Motorists should expect minor traffic slowdowns. LC#M101EA

U.S. 101 (27.7) – Bridge work near Myers Flat continues. Lane closures will be in effect and motorists should expect minor slowdowns. LC#C101CF

U.S. 101 (82.7) – Construction work at the Indianola Cutoff will continue. Southbound 101 access is currently unavailable due to a median closure. Southbound motorists should choose an alternate route. LC#C101FD

U.S. 101 (120.1) – Work at Hiltons Road will begin on Monday, October 28. Lane closures will be in effect from 7 a.m. to 6 p.m. Motorists should expect 5-minute delays. LC#P101HA

U.S. 101 (124/126.1) – Tree work north of Orick will conclude on Friday, October 25. One-way traffic control will be in effect from 7 a.m. to 6 p.m. Motorists should expect 5-minute delays. LC#P101HA

Highway 169

Route 169 (32.4/32.6) – Construction work west of Lower Weitchpec School Road will continue. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect 10-minute delays. LC#C169BA

Highway 299

Route 299 (5.8/6.2) – Drainage work near Blue Lake will continue. One-way traffic control will be in effect from 7:30 a.m. to 8 p.m. Motorists should expect 10-minute delays. LC#C299QA

Route 299 (11/11.4) – Construction about 11 miles from U.S. 101 will continue. One-way traffic control will be in effect from 7 a.m. to 5 p.m. Motorists should expect 10-minute delays. LC#C299FA

Route 299 (21.5/22.5) – Utility work near Redwood Creek Bridge will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect 10-minute delays. LC#C299QA

Route 299 (26.8/27.4) – Emergency work near Berry Summit Vista Point will continue. One-way traffic control will be in effect from 7:30 a.m. to 8 p.m. Travelers should expect 10-minute delays. LC#C299OA

Route 299 (27.4/29.1) – Utility work between Old Highway 299 and Titlow Hill Road will continue. One-way traffic control will be in effect from 7 a.m. to 7 p.m. Motorists should expect 10-minute delays. LC#P299BA

Route 299 (31.4/33.1) - Construction work west of the East Fork Campground will continue. One-way traffic control will be in effect. Motorists should expect 10-minute delays. LC#C299LA