How to resolve AdBlock issue?
Refresh this page
How to resolve AdBlock issue?
Refresh this page
Lake County News,California
  • Home
    • Registration Form
  • News
    • Community
      • Obituaries
      • Letters
      • Commentary
    • Education
    • Veterans
    • Police Logs
    • Business
    • Recreation
    • Health
    • Religion
    • Legals
    • Arts & Life
    • Regional
  • Calendar
  • Contact us
    • FAQs
    • Phones, E-Mail
    • Subscribe
  • Advertise Here
  • Login
How to resolve AdBlock issue?
Refresh this page
How to resolve AdBlock issue?
Refresh this page

News

Osteoporosis, the silent disease, can shorten your life − here’s how to prevent fractures and keep bones healthy

 

With some simple lifestyle changes, you can lower your risk of osteoporosis. MoMo Productions/DigitalVision via Getty Images

Because there are typically no symptoms until the first fracture occurs, osteoporosis is considered a silent disease. Some call it a silent killer.

Osteoporosis is a bone disease characterized by decreased bone density and strength, leading to fragile, brittle bones that increase the risk of fractures, especially in the spine, hips and wrists.

The National Osteoporosis Foundation estimates that more than 10 million Americans have osteoporosis. Another 43 million have low bone mass, which is the precursor to osteoporosis. By 2030, the number of adults with osteoporosis or low bone mass is estimated to increase by more than 30%, to 71 million.

The reasons for the increase include lifestyle issues, particularly smoking, lack of physical activity and alcohol abuse. Our aging population, along with the insufficient attention paid to this disease, are also why osteoporosis is on the rise.

An illustration of osteoporosis of the spine, which features sponge-like, brownish tissue.
An illustration of osteoporosis of the spine. Note the sponge-like tissue, which is partially destroyed. BSIP/Universal Images Group via Getty Images

If you are older, it may be discouraging to read those statistics. But as orthopedic specialists who have studied this disease, we know that osteoporosis is not inevitable. The key to having healthy bones for a lifetime is to take some simple preventive measures – and the earlier, the better.

Although the symptoms are not obvious early on, certain signs will indicate your bones are becoming weaker. The most serious complications of osteoporosis are fractures, which can lead to chronic pain, hospitalization, disability, depression, reduced quality of life and increased mortality. Worldwide, osteoporosis causes nearly 9 million fractures annually. That’s one osteoporotic fracture every three seconds.

Height loss, back pain

Minor bumps or falls may lead to fractures, especially in the hip, wrist or spine. These types of fractures are often the first sign of the disease.

If you notice that you’re getting shorter, the cause could be compression fractures in the spine; this too is a common symptom of osteoporosis.

Although it’s typical for most people to lose height as they age – about 1 to 1½ inches (2.5 to 3.8 centimeters) over a lifetime – those with osteoporosis who have multiple spinal fractures could lose 2 to 3 inches or more in a relatively rapid time frame.

Curved posture, or noticeable changes in posture, may lead to a hunched back, which could be a sign that your spine is weakening and losing density.

Persistent back pain is another indicator – this too is the result of tiny fractures or compression of the spine.

A healthy diet and exercise are two ways to build up bone density.

Calcium and vitamin D

Osteoporosis cannot be completely cured, but certain lifestyle and dietary factors can lower your risk.

Calcium and vitamin D are essential for bone health. Calcium helps maintain strong bones, while vitamin D assists in calcium absorption. Women over age 50 and men over 70 should consume at least 1,200 milligrams of calcium daily from food and, if necessary, supplements.

The easy way to get calcium is through dairy products. Milk, yogurt and cheese are among the richest sources. One cup of milk provides about 300 milligrams of calcium, one-fourth of the daily requirement. If you are vegan, calcium is in many plant-based foods, including soy, beans, peas, lentils, oranges, almonds and dark leafy greens.

Adults should aim for two to three servings of calcium-rich foods daily. Consuming them throughout the day with meals helps improve absorption.

Vitamin D is obtained mostly from supplements and sunlight, which is the easiest way to get the recommended dose. Your body will produce enough vitamin D if you expose your arms, legs and face to direct sunlight for 10 to 30 minutes between 10 a.m. and 3 p.m., two to three times a week.

Although it’s best to wear short-sleeve shirts and shorts during this brief period, it’s okay to wear sunglasses and apply sunscreen to your face. Sunlight through a window won’t have the same effect – glass reduces absorption of the UV rays needed for vitamin D production. People with darker skin, or those living in less sunny regions, may need more sunlight to get the same effect.

If a doctor has given you a diagnosis of osteoporosis, it’s possible the calcium and vitamin D that you’re getting through food and sun exposure alone is not enough; you should ask your doctor if you need medication.

Chickpeas, sesame seeds and dark green vegetables, such as kale, arugula and broccoli, are good sources of calcium.

Dance, jog, lift weights and avoid alcohol

Regular exercise is an excellent activity that can help stave off osteoporosis. Weight-bearing exercises, such as brisk walking, jogging and dancing, are great for increasing bone density. Strength training, such as lifting weights, helps with stability and flexibility, which reduces the risk of falling.

Aim for 30 minutes of weight-bearing exercise at least four days a week, combined with muscle-strengthening exercises at least twice a week.

Particularly for women, who lose bone density during and after menopause, regular exercise is critical. Working out prior to menopause will reduce the risk of osteoporosis in your later years.

And avoid harmful habits – smoking and heavy alcohol consumption can weaken bone density and increase the risk of fractures.

Fall prevention strategies and balance training are crucial and can help reduce the risk of fractures.

Screening and treatment

Women should start osteoporosis screening at age 65, according to the U.S. Preventive Services Task Force. Men should consider screening if they have risk factors for osteoporosis, which include smoking, alcohol use disorder, some chronic diseases such as diabetes, and age. Men over 70 are at higher risk.

Medical imaging such as a bone density scan and spinal X-rays can help confirm osteoporosis and detect compression fractures. These basic tests, combined with age and medical history, are enough to make a clear diagnosis.

Managing osteoporosis is a long-term process that requires ongoing commitment to lifestyle changes. Recognizing the early warning signs and making these proactive lifestyle changes is the first step to prevent the disease and keep your bones healthy.The Conversation

Ting Zhang, Research Scholar of Orthopedics, University of Pittsburgh and Jianying Zhang, Research Professor of Orthopaedic Surgery, University of Pittsburgh

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Details
Written by: Ting Zhang, University of Pittsburgh and Jianying Zhang, University of Pittsburgh
Published: 09 November 2024

Snow and tell: Caltrans plows ahead to help Californians navigate frosty travel



Months before Mother Nature trades short sleeves for snowshoes, Caltrans maintenance personnel throughout the Golden State begin preparations for the season’s first flurries.

Caltrans crews operate on a 24/7 schedule during adverse weather conditions to keep the roads safe.

The video above takes viewers behind the scenes as Department maintenance experts shore up more than 1,500 pieces of heavy machinery and snowplows in preparation for their deployment into wintry conditions:

Here are a few trusted driving tips that will help Californians stay safe during winter travel.

WINTER DRIVING TIPS:

• Before you get on the road, go to the Caltrans website and check QuickMap (quickmap.dot.ca.gov) for real-time traffic information or call 1-800-427-ROAD.
• Move over to allow Caltrans maintenance crews, California Highway Patrol officers, and other emergency personnel to perform the important tasks needed to keep the roads open and quickly respond to emergencies.
• Turn on your headlights to see and be seen. Be observant and maintain a safe distance behind snow removal equipment. Do not crowd the plow. Do not pass snowplows unless directed to do so by law enforcement or emergency public service personnel.
• Be prepared for delays and carry extra food, water, blankets and other essentials, and pack cell phone chargers.
• Check your tires. Make sure they are properly inflated, and the tread is in good condition.
• Always carry chains. Make sure they are the proper size for your tires and are in working order.
• Winterize your vehicle. Make sure brakes, windshield wipers, heater/defroster, and exhaust system are in good working order. Make sure fluids are topped-off, especially windshield washer fluid.
• Reduce your speed to match driving conditions and allow more time to reach your destination. • Know that bridges and ramps may be more slippery and icier than the roadway.
• Keep your electric vehicle batteries charged and your fuel tank full. Bad weather may cause long delays or closures.
• If you start sliding on snow or ice, slowly take your foot off the gas pedal and steer in the direction you wish to travel. Do not lock your brakes — pump the brakes if needed or apply steady pressure if your vehicle is equipped with anti-lock brakes.

Additional winter safe driving tips and more information about Caltrans efforts to prepare the transportation system for seasonal weather can be found on the Caltrans website.
Details
Written by: LAKE COUNTY NEWS REPORTS
Published: 09 November 2024

Space News: Powerful new US-Indian satellite will track Earth’s changing surface




We don’t always notice it, but much of Earth’s surface is in constant motion. Scientists have used satellites and ground-based instruments to track land movement associated with volcanoes, earthquakes, landslides, and other phenomena.

But a new satellite from NASA and the Indian Space Research Organisation, or ISRO, aims to improve what we know and, potentially, help us prepare for and recover from natural and human-caused disasters.

The NISAR (NASA-ISRO Synthetic Aperture Radar) mission will measure the motion of nearly all of the planet’s land and ice-covered surfaces twice every 12 days.

The pace of NISAR’s data collection will give researchers a fuller picture of how Earth’s surface changes over time.

“This kind of regular observation allows us to look at how Earth’s surface moves across nearly the entire planet,” said Cathleen Jones, NISAR applications lead at NASA’s Jet Propulsion Laboratory in Southern California.

Together with complementary measurements from other satellites and instruments, NISAR’s data will provide a more complete picture of how Earth’s surface moves horizontally and vertically.

The information will be crucial to better understanding everything from the mechanics of Earth’s crust to which parts of the world are prone to earthquakes and volcanic eruptions. It could even help resolve whether sections of a levee are damaged or if a hillside is starting to move in a landslide.

What lies beneath

Targeting an early 2025 launch from India, the mission will be able to detect surface motions down to fractions of an inch. In addition to monitoring changes to Earth’s surface, the satellite will be able to track the motion of ice sheets, glaciers, and sea ice, and map changes to vegetation.

The source of that remarkable detail is a pair of radar instruments that operate at long wavelengths: an L-band system built by JPL and an S-band system built by ISRO. The NISAR satellite is the first to carry both. Each instrument can collect measurements day and night and see through clouds that can obstruct the view of optical instruments.

The L-band instrument will also be able to penetrate dense vegetation to measure ground motion. This capability will be especially useful in areas surrounding volcanoes or faults that are obscured by vegetation.

“The NISAR satellite won’t tell us when earthquakes will happen. Instead, it will help us better understand which areas of the world are most susceptible to significant earthquakes,” said Mark Simons, the U.S. solid Earth science lead for the mission at Caltech in Pasadena, California.

Data from the satellite will give researchers insight into which parts of a fault slowly move without producing earthquakes and which sections are locked together and might suddenly slip.

In relatively well-monitored areas like California, researchers can use NISAR to focus on specific regions that could produce an earthquake. But in parts of the world that aren’t as well monitored, NISAR measurements could reveal new earthquake-prone areas.

And when earthquakes do occur, data from the satellite will help researchers understand what happened on the faults that ruptured.

“From the ISRO perspective, we are particularly interested in the Himalayan plate boundary,” said Sreejith K M, the ISRO solid Earth science lead for NISAR at the Space Applications Center in Ahmedabad, India. “The area has produced great magnitude earthquakes in the past, and NISAR will give us unprecedented information on the seismic hazards of the Himalaya.”

Surface motion is also important for volcano researchers, who need data collected regularly over time to detect land movements that may be precursors to an eruption. As magma shifts below Earth’s surface, the land can bulge or sink. The NISAR satellite will help provide a fuller picture for why a volcano deforms and whether that movement signals an eruption.

Finding normal

When it comes to infrastructure such as levees, aqueducts, and dams, NISAR’s ability to provide continuous measurements over years will help to establish the usual state of the structures and surrounding land. Then, if something changes, resource managers may be able to pinpoint specific areas to examine.

“Instead of going out and surveying an entire aqueduct every five years, you can target your surveys to problem areas,” said Jones.

The data could be equally valuable for showing that a dam hasn’t changed after a disaster like an earthquake. For instance, if a large earthquake struck San Francisco, liquefaction — where loosely packed or waterlogged sediment loses its stability after severe ground shaking — could pose a problem for dams and levees along the Sacramento-San Joaquin River Delta.

“There’s over a thousand miles of levees,” said Jones. “You’d need an army to go out and look at them all.” The NISAR mission would help authorities survey them from space and identify damaged areas. “Then you can save your time and only go out to inspect areas that have changed. That could save a lot of money on repairs after a disaster.”

The NISAR mission is an equal collaboration between NASA and ISRO and marks the first time the two agencies have cooperated on hardware development for an Earth-observing mission.

Managed for the agency by Caltech, JPL leads the U.S. component of the project and is providing the mission’s L-band SAR. NASA is also providing the radar reflector antenna, the deployable boom, a high-rate communication subsystem for science data, GPS receivers, a solid-state recorder, and payload data subsystem.

The U R Rao Satellite Centre in Bengaluru, India, which leads the ISRO component of the mission, is providing the spacecraft bus, the launch vehicle, and associated launch services and satellite mission operations. The ISRO Space Applications Centre in Ahmedabad is providing the S-band SAR electronics.

To learn more about NISAR, visit https://nisar.jpl.nasa.gov.
Details
Written by: NASA Jet Propulsion Laboratory
Published: 09 November 2024

Late night fire reported at Northshore RV park

LAKE COUNTY, Calif. — A fire that occurred late Friday night was reported to have sent a person to the hospital with burns.

The fire was first reported at around 11:50 p.m. Friday at BJ Walls RV Park on Lakeshore Boulevard in Nice.

The initial dispatch stated that an RV was on fire. It was not certain if a person was in the RV, but animals were reported to be trapped inside.

The first firefighter unit to arrive found two RVs on fire, with a nearby single family home also reported to be catching fire and evacuated, according to radio reports.

Radio traffic indicated that the fire was knocked down shortly after 12:10 a.m. Saturday, with mop up expected to take up to an hour and a half.

Firefighters at the scene requested an air ambulance to respond in order to transport a burn victim to a regional trauma center, according to scanner reports.

More information on the incident was not immediately available.

Email Elizabeth Larson at This email address is being protected from spambots. You need JavaScript enabled to view it.. Follow her on Twitter, @ERLarson, or Lake County News, @LakeCoNews.
Details
Written by: Elizabeth Larson
Published: 09 November 2024
  1. Paws for Celebration: CHP welcomes six new K9 teams
  2. Estate Planning: The need to review estate planning before someone dies
  3. Microplastics promote cloud formation, with likely effects on weather and climate

Subcategories

Community

  • 480
  • 481
  • 482
  • 483
  • 484
  • 485
  • 486
  • 487
  • 488
  • 489
How to resolve AdBlock issue?
Refresh this page
Copyright © 2026 Lake County News,California. All Rights Reserved.